Dell Precision 330 User Manual
Page 95
Advertising
Installing Upgrades
95
Re m o v i n g t h e A G P C a r d B r a c e ( M i n i To w e r C h a s s i s )
3
Rotate the brace up until it disengages from the card guide at the front
of the chassis. Then lift the brace away from the chassis.
To replace the AGP card brace, perform the following steps:
1
Insert the tab on one end of the brace into the slot on the card guide at
the front of the chassis. See "
Removing the AGP Card Brace (Mini
2
Lower the brace, ensuring that the AGP retention lever on the bottom
of the brace is aligned with the top of the AGP card.
3
Replace the screw that secures the brace to the chassis.
Front of
Computer
expansion-card guide
AGP card brace
screw
tab
slot
Advertising