Dell PowerEdge C6100 - Manual (Page 12)

12 Using the Baseboard Management Controller
ww
w
.
de
l
l
. co
m
|
s
u
pp
o
rt
. d
e
ll
. c
o
m
To add a user, complete these steps:
1 From the User List window, select an unconfigured user ID number and click the Add
User
button.
2 Enter a user name, select an IPMI version, enter and confirm a password, and select
network privileges. Click the Add button.
To change the settings for a user, complete these steps:
1 From the User List window, select the user’s ID number and click the Modify User
button.
2 Change the applicable information and click the Modify button.
To delete a user, select the user’s ID number from the User List window and click the Delete
User
button.
Remote Control
The Remote Control menu selection allows you to:
• Power on, power off, power cycle, and reset the system remotely (Power Control button).
• Use the local management station’s display, mouse, and keyboard to control the
corresponding devices on a remotely managed system (Console Redirection
button).
Power Control
To perform a power control operation, click the applicable radio button, then click the Perform
Action button.