Dell PowerEdge C6100 - Manual (Page 21)

21 Using the Baseboard Management Controller
Table 1-15. IMPI LAN Commands (NETFUN: 0CH, 0DH)
Commands NetFn CMD O/M Supported
Set LAN Configuration
Parameters Get LAN
Configuration Parameters
Suspend BMC ARP
Get
IP/UDP/RMCP
Statistics
Transport
Transport
Transport
Transport 01H
02H
03H
04H M
M
O
N
Yes
Yes
Yes
No
Table 1-16. IMPI Serial/Modem Commands (NETFUN: 0CH, 0DH)
Commands NetFn CMD O/M Supported
Set Serial/Modem Configuation Transport 10H N No
Get Serial/Modem Configuration Transport 11H N No
Set Serial/Modem Mux Transport 12H N No
Get Tap Response Codes Transport 13H N No
Set PPP UDP Proxy Transmit Data Transport 14H N No
Get PPP UDP Proxy Transmit Data Transport 15H N No
Send PPP UDP Proxy Packet Transport 16H N No
Get PPP UDP Proxy Receive Data Transport 17H N No
Serial/Modem Connection Active Transport 18H N No
Callback Transport 19H N No
Set User Callback Options Transport 1AH N No
Get User Callback Options Transport 1BH N No
Table 1-17. SOL Commands (NETFUN: 0CH, 0DH)
Commands NetFn CMD O/M Supported
SOL Activating
Set SOL Configuration Parameters
Get SOL Configuration Parameters Transport
Transport
Transport 20H
21H
22H M
M
M Yes
Yes
Yes