Dell PowerEdge C6100 - Manual (Page 36)

36 Using the Baseboard Management Controller
Table 1-37. Vendor OEM Commands (NETFUN: 34H, 35H)
Commands NetFn CMD Request and Response
SetFSCTable OEM 63H REQUEST:
Byte 1 – FSC Table Setting
[7] – Enabled/Disabled FAN Table
0h: Disabled (Default)
1h: Enabled
[6:0] – Fan Table Setting(0-based)
80h: 1st FSC fan table (default: 13800RPM)
81h: 2nd FSC fan table (FACEBOOK)
82h: 3rd FSC fan table (Oscillation)
83h: 4th FSC fan table (Western Geco)
84h: 5th FSC fan table (Loki)
Byte 2 – FSC Table Privilege
Default: 0x00
Bit 0: Set by BIOS
Bit1: Set by User
(Higher bit has higher privilege.)
P.S. Exception action of privilege – Back to default
Byte1: 0x00
Byte2: 0x00
RESPONSE:
Byte 1 — Completion code
GetFSCTable OEM 64H REQUEST:
(None)
RESPONSE:
Byte 1 — Completion code
Byte 2 – FSC Table Setting
[7] – Enabled/Disabled FAN Table
0h: Disabled (Default)
1h: Enabled
[6:0] – Fan Table Setting(0-based)
80h: 1st FSC fan table (default: 138RPM)
81h: 2nd FSC fan table (FACEBOOK)
82h: 3rd FSC fan table (Oscillation)
83h: 4th FSC fan table (Western Geco)
84h: 5th FSC fan table (Loki)
Byte 3 – FSC Table Privilege
Default: 0x00
Bit 0: Set by BIOS
Bit1: Set by User
(Higher bit has higher privilege.)