Dell PowerEdge C6100 - Manual (Page 51)

51 Using the Baseboard Management Controller
Lockout Window 3 2 Specifies the window, in second, during which if the
consecutive maximum number of authentication failures
is reached, the account should be disabled. Setting this
value to 0 will disable the lockout feature.
Default setting is 180 seconds.
Lockout Time 4 2 Specifies the time period an account should be disabled if
the maximum number of authentication failures is
reached. The unit is second. Setting this value to 0 will
disable the lockout feature.
Default value is 3600 (1 hour).
Table 1-53. Configuration ID = 06h, DNS
Attribute ID Size Description
DNS Dhcp Enable 1 1 Specifies that the DNS server IP addresses should be
assigned from the DHCP server.
0: FALSE (default)
1: TRUE.
DNS Server1 2
4 Specifies the IP address for DNS server 1. This
parameter is read-only if DNS Dhcp Enable and
DHCP are enabled.
DNS Server2 3 4 Specifies the IP address for DNS server 2. This
parameter is read-only if DNS Dhcp Enable and
DHCP are enabled.
DNS Register 4
BMC 1 Enable registering the BMC host name on the DNS
server
0: FALSE (default)
1: TRUE.
DNS BMC 5
Host Name
1..64 Specifies the DNS BMC host name. This parameter is
read-only if DNS Register BMC is set to TRUE. At
least one character must be alphabetic.
The default name is bmc-service_tag, where
service_tag is the service tag number of the Dell
server. For example: bmc-XG3487A.
DNS 6
Domain Name
Dhcp Enable 1 Specifies that the DNS domain name should be
assigned from the DHCP server.
0: FALSE (default)
1: TRUE.
DNS 7
Domain Name 1..256 The DNS domain name string. This parameter is
read-only if DNS Domain Name Dhcp Enable is set to
TRUE.
Characters are restricted to alphanumeric, '-' and '.'.
Default is “”