Dell PowerEdge C6100 - Manual (Page 39)

39 Using the Baseboard Management Controller
Chassis Control Command Implementation
Table 1-40. Chassis Control Command (NetFn=00/01,
Cmd=02h) Request Data Byte 1-Bit [3:0] Description
0h=Power Down BMC issues a signal to simulate the ACPI-compliant 4 second power
off.
01=Power On
Power on.
2h=Power Cycle Power cycle.
3h=Hard Reset Hard reset.
4h=Pulse Diagnostic Interrupt BMC issues a NMI signal to the system.
5h=Soft Shutdown
BMC triggers a power button signal.