Installing the control panel assembly, Tower system. figure 3-32 il, Figure 3-32 – Dell PowerEdge 2900 User Manual
Page 106: D. see figure 3-32, The back of the control panel. see figure 3-32
106
Installing System Components
Figure 3-32.
Removing the Control Panel Assembly
Installing the Control Panel Assembly
The following procedure applies to either a rack or tower system. Figure 3-32 illustrates a control panel
assembly in the rack orientation.
1 Insert the control panel assembly display module into the chassis cutout and secure with the two Torx
screws.
2 Affix the control panel label to the display module.
3 Install the control panel board in the system chassis and secure with the three Phillips screws. See
4 Connect the display module ribbon cable to the control panel board. See Figure 3-32.
1
display module screws (2)
2
display module
3
display module cable
4
control panel board
5
control panel cable
6
screws (3)
7
system chassis
8
display module label
6
5
4
2
3
7
8
1