Figure 6-1 for jumper location, Boot the system. see figure 6-1 for, Figure 6-1 shows the location of the configuration – Dell PowerEdge 2900 User Manual
Page 140: D. table 6-1 lists the
Advertising
140
Jumpers and Connectors
Figure 6-1.
System Board Jumpers
Table 6-1.
System Board Jumper Settings
Jumper
Setting
Description
PWRD_EN
(default) The password feature is enabled.
The password feature is disabled.
NVRAM_CLR
(default) The configuration settings in NVRAM are retained at system
boot.
The configuration settings in NVRAM are cleared at next
system boot.
Advertising