Dell PowerEdge 2900 - Manual (Page 33)

About Your System
33
Warning Messages
A warning message alerts you to a possible problem and prompts you to respond before the system
continues a task. For example, before you format a diskette, a message will warn you that you may lose all
data on the diskette. Warning messages usually interrupt the task and require you to respond by typing
y
(yes) or n (no).
NOTE:
Warning messages are generated by either the application or the operating system. For more information,
see the documentation that accompanied the operating system or application.
Diagnostics Messages
When you run system diagnostics, an error message may result. Diagnostic error messages are not
covered in this section. Record the message on a copy of the Diagnostics Checklist in "Getting Help" on
page 147, and then follow the instructions in that section for obtaining technical assistance.
Alert Messages
Systems management software generates alert messages for your system. Alert messages include
information, status, warning, and failure messages for drive, temperature, fan, and power conditions. For
more information, see the systems management software documentation.
Warning: The current
memory configuration is
not optimal. Dell
recommends a population of
2, 4, 8, or 12 DIMMs. DIMMs
should be populated
sequentially starting in
slot 1.
System has detected a legal but non-
optimal population of DIMMs (for
example, 1 DIMM, 6 DIMMs, 4
DIMMs in slots 1, 2, 5, and 6, etc.).
The system will run with all memory
accessible but will experience sub-
optimal performance. Populate 2, 4, 8, or 12 DIMMs
sequentially beginning with slot 1. See
"Memory" on page 82.
Write fault
Write fault on selected
drive
Faulty diskette, optical/diskette drive
assembly, hard drive, or hard-drive
subsystem. See "Troubleshooting a Diskette Drive"
on page 126, "Troubleshooting an
Optical Drive" on page 127, or
"Troubleshooting a Hard Drive" on
page 129.
NOTE:
For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 169.
Table 1-7. System Messages (continued)
Message Causes Corrective Actions