Entering the bmc setup module, Bmc setup module options – Dell PowerEdge 2900 User Manual
Page 47
Advertising
Using the System Setup Program
47
Entering the BMC Setup Module
1 Turn on or restart your system.
2 Press <
Ctrl-E
> when prompted after POST.
If your operating system begins to load before you press <
Crtl-E
>, allow the system to finish
booting, and then restart your system and try again.
BMC Setup Module Options
For information about the BMC Setup Module options and how to configure the emergency
management port (EMP), see the
BMC User’s Guide.
Advertising