Dell PowerEdge 2900 - Manual (Page 67)

Installing System Components
67
4 Remove the fan from the bracket by squeezing the release handles on top of the fan and pulling the
fan out of the bracket. See Figure 3-13.
NOTICE:
Do not remove more than one fan from the system at a time and do not operate the system with any fan
removed for an extended period of time. Overheating can occur resulting in a system shutdown and loss of data.
5 Replace the fan.
6 Rotate the fan bracket toward the shroud and slightly squeeze the side tabs so that the tabs enter the
latch slots.
7 Close the system. See "Closing the System" on page 53.
8 Replace the front bezel, if removed.
Figure 3-13. Removing and Replacing the Cooling Shroud Fan
1 fan 2 fan release latch (2) 3 cooling shroud
4 fan bracket latch (2) 5 fan bracket
1
3
2
5
4