Removing the sas controller daughter card, Ee. see figure 3-27, See figure 3-27 – Dell PowerEdge 2900 User Manual
Page 97: Slots. see figure 3-27, D. see figure 3-27
Installing System Components
97
Figure 3-27.
Replacing a SAS RAID Controller Daughter Card Battery
Removing the SAS Controller Daughter Card
The following procedure applies to either a SAS controller or a SAS RAID controller daughter card. A SAS
RAID controller daughter card is illustrated in Figure 3-28.
1 If applicable, disconnect the RAID battery cable from the controller card by releasing the tab on the
cable connector on the daughter card and pulling the battery cable free.
2 Push outward on the plastic guide rails and gently pull up on the card edges until the card-edge
connector clears the socket on the system board. See Figure 3-28.
1
SAS RAID controller daughter
card
2
RAID battery cable
3
connector release tab
4
routing hole for RAID battery
cable
5
expansion-bay bracket
6
battery bay
7
RAID battery
6
7
4
3
1
3
5
2