Bypass mode, Tray mode – Dell 2355dn Multifunction Mono Laser Printer User Manual
Page 106
Advertising
105
MPF
MPF can be configured to behave in Tray Mode or in Bypass Mode by setting the Configure
MPF menu in the operator panel.
Bypass Mode
In this mode the printer pulls the paper from MPF first unless it is closed or empty. MPF gets the
highest priority and pulls whatever media is present in the MPF.
NOTE:
You can use this feature in print and copy job.
Tray Mode
In this mode the MPF is treated as another paper tray. Instead of treating MPF as first preference
paper source, printer pulls paper from the tray that matches the size and type. The first preference
goes to the default source.
NOTE:
You can use this feature in print, copy, and fax job.
Advertising