Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 78)

77
Set IP Address Utility
This program is for the network IP setting using the MAC address which is the hardware serial
number of the network printer card or interface. Especially, it is for the network administrator to
set several network IPs at the same time.
NOTE: You can only use Set IP Address when your printer is connected to a network.
1 Connect the network cable to your machine.
2 Print the Network Configuration page of the printer to see the current network configuration
and MAC address.
3 From the Start menu, select Programs Dell Printers Dell 2355dn Laser MFP
Set IP Address.
4 Click in the SetIP window to open the TCP/IP configuration window.
5 Enter the network card's MAC address, IP address, subnet mask, default gateway, and then
click Apply
NOTE: when you enter the MAC address, enter it without colon(:).
6 Click OK.
7 Click Exit to close the SetIP program.