Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 255)

254
Configuring Printer Properties
Using the properties window provided by the Printers configuration, you can change the various
properties for your machine as a printer.
1 Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2 Select your printer on the available printers list and click Properties.
3 The Printer Properties window opens.
The following five tabs display at the top of the window:
• General: allows you to change the printer location and name. The name entered in this
tab displays on the printer list in Printers configuration.
• Connection: allows you to view or select another port. If you change the printer port
from USB to parallel or vice versa while in use, you must re-configure the printer port
in this tab.
• Driver: allows you to view or select another printer driver. By clicking Options, you
can set the default device options.
• Jobs: shows the list of print jobs. Click Cancel Job to cancel the selected job and select
the Show completed jobs check box to see previous jobs on the job list.
• Classes: shows the class that your printer is in. Click Add to Class to add your printer
to a specific class or click Remove from Class to remove the printer from the selected
class.
4 Click OK to apply the changes and close the Printer Properties Window.