Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 202)

201
Once Toll Save mode is activated, your printer stores all of the documents to be faxed into its
memory and sends them at the programmed time.
To turn Toll Save mode off, follow steps 1 and 5 in "Toll Save Mode" and then press the left/right
arrows until Off displays.
Setting up the Fax System
Changing the Fax Setup Options
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Default Setting.
4 Press the up/down arrows to select the Fax Default Common.
5 Press the up/down arrows to display the desired menu item.
6 Use the left/right arrows to find the status to enter the value for the option you have selected.
7 Press the home icon ( ) to return to the Standby mode.
Available Fax Defaults Options
You can use the following setup options for configuring the fax system:
Option Description
Contrast You can select the default contrast value to fax your documents normal, lighter,
or darker.
Send Quality You can select the default resolution setting to Standard, Fine, Super Fine,
Photo Fax, or Color Fax.
Original Type You can select the type of original you are faxing. This will give you a better
fax.
Original Size You can select the original document type to enhance the quality of a document.
Tone / Pulse You can set the dial mode for your machine to either tone dialing or pulse
dialing.
Ring to Answer You can specify the number of times the printer rings, 2-7, before answering an
incoming call.