Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 201)

200
Setting Sounds
Speaker, Ringer, Dial Tone, Fault, Conflict, and Selection
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup.
4 Press the up/down arrows to select Sound & Volume.
5 Press the up/down arrows to select the appropriate option you want.
• Speaker: Turns On or Off the sounds from the telephone line through the speaker, such
as a dial tone or a fax tone. With this option set to Comm. which means Comm., the
speaker is on until the remote machine answers.
• Ringer: Adjusts the ringer volume. For the ringer volume, you can select Off, Low,
Med, and High.
• Dial Tone: Adjusts the dial tone volume. For the dial tone volume, you can select 1-7.
• Fault: Adjusts the ‘error occurs’ volume. For the error volume, you can select Off,
Low, Med, and High.
• Conflict: Adjusts the conflict volume. For the error volume, you can select Off, Low,
Med, and High.
• Selection: You can set the selection volume for when pressing the button, you can
select Off, Low, Med, and High.
6 Press the home icon ( ) to return to the Standby mode.
Toll Save Mode
The Toll Save mode can be used to save scanned documents for transmission at a specified time
in order to take advantage of lower long distance rates.
To turn the Toll Save mode on:
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Fax Setup.
4 Press the up/down arrows to select Toll Save.
5 Press the left/right arrows to display On.
6 Select the Start Time and End Time each using the up/down arrows.
7 Press the home icon ( ) to return to the Standby mode.