Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 204)

203
Testing Fax line connection
1 Press Setup Maintenance from the home screen.
2 Press the Next ( ) button.
3 Press Fax Line Test.
The printer display the test result.
If the fax line connection test has failed, check the telephone line cord connection or contact
your telephone service provider.
NOTE: If test pass - you can start using the Fax functionality
If test fail - Need to direct them to the troubleshooting section for fax.
Receive Code The Receive Code enables you to initiate fax reception from an extension
phone plugged into the extension telephone socket(
) on the back of the
printer. If you pick up the extension phone and hear fax tones, enter the Receive
Code. The Receive Code is preset to *9* at the factory. Settings range from 0-9.
See "Receiving Manually Using an Extension Telephone" for more information
about using the code.
DRPD Mode You can receive a call using the Distinctive Ring Pattern Detection (DRPD)
feature which enables a user to use a single telephone line to answer several
different telephone numbers. In this menu, you can set the printer to recognize
the ring patterns to answer. For details about this feature, see "Receiving Faxes
Using the DRPD Mode".
Tray You can set the tray that you want to use for a received fax printing job.
Print Duplex You can set the machine to print received faxes on both sides of paper. The
available options are Off, Long Edge, and Short Edge.
Option Description