Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 45)

44
Changing the Display Language
To change the displayed language that the operator panel displays, follow these steps:
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup.
4 Press the up/down arrows to Language.
5 Press the left/right arrows to select the language you want.
6 Press the home icon ( ) to return to the Standby mode.
Selecting Country
To change the country that appears on the operator panel, follow these steps:
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup.
4 Press the up/down arrows to select Select Country.
5 Press the up/down arrows to select the country you want.
6 Press the home icon ( ) to return to the Standby mode.
Power Save Mode
The Power Save mode enables your printer to reduce power consumption when it is not in actual
use. You can enable this mode by selecting the duration for which the printer waits after a job is
printed before it switches to a reduced power state.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup.
4 Press the up/down arrows to select Print Power Save.
5 Press the left/right arrows to select the time settings you want.
6 Press the home icon ( ) to return to the Standby mode.
NOTE: Available setting range is from 5 min. to 120 min. (factory default : 30 min.) and you can
also access this mode from the EWS (Printer Settings Print Settings Setup Menu and
select Print Power Save).