Dell PowerVault NX3500 User Manual
Page 103
Troubleshooting Your System
103
3 Remove the following components from the system. See "Installing
System Components" on page 49.
• Hard drives
• USB memory key
• NIC hardware key
• VFlash media
• Expansion card and expansion-card riser
• iDRAC6 Enterprise card
• Power supply
• Fans
• Processor and heat sink
• Memory modules
• System Battery
4 Let the system dry thoroughly for at least 24 hours.
5 Reinstall the components you removed in step 3.
6 Close the system. See "Closing the System" on page 53.
7 Reconnect the system to the electrical outlet and turn on the system.
If the system does not start properly, see "Getting Help" on page 113.
8 If the system starts properly, shut down the system and reinstall the
expansion card that you removed. See "Replacing an Expansion NIC Card"
9 Restart the system.
10 Run the appropriate online diagnostic test. See "Running the System
Diagnostics" on page 105.
If the tests fail, see "Getting Help" on page 113.
book.book Page 103 Monday, January 24, 2011 12:24 PM