Dell PowerVault NX3500 - Manual (Page 78)

78 Installing System Components
1 Disconnect the power cable from the power source.
2 Disconnect the power cable from the power supply and remove the Velcro
straps that bundle and secure the system cables.
NOTE: You may have to unlatch and lift the optional cable management arm if
it interferes with power-supply removal. For information about the cable
management arm, see the system’s rack documentation.
3 Press the release latch and pull the power supply straight out to release it
from the power distribution board and clear the chassis.
Figure 2-15. Removing and Installing a Power Supply
1 power supply 2 release latch
3 power supply handle
1
2
3
book.book Page 78 Monday, January 24, 2011 12:24 PM