Dell PowerVault NX3500 - Manual (Page 43)

About Your Solution 43
The following
DIMMs should
match in
geometry:
x,x,...
Invalid memory
configuration. The specified
memory modules do not
match in size, number of
ranks, or number of
data lanes.
Ensure that the memory
modules are installed in a
valid configuration.
See "General Memory
Module Installation
Guidelines" on page 67.
The following
DIMMs should
match in rank
count: x,x,...
The following
DIMMs should
match in size:
x,x,...
The following
DIMMs should
match in size
and geometry:
x,x,...
The following
DIMMs should
match in size
and rank count:
x,x,...
Thermal sensor
not detected on
x.
A memory module without a
thermal sensor is installed in
the specified memory slot.
Replace the memory
module. See "System
Memory" on page 66.
Time-of-day
clock stopped.
Faulty battery or faulty chip. See "Troubleshooting the
System Battery" on page 95.
Time-of-day not
set - please run
SETUP program.
Incorrect Time or Date
settings; faulty system
battery.
Check the Time and Date
settings. If the problem
persists, replace the system
battery. See "System Battery"
on page 79.
Timer chip
counter 2 failed.
Faulty system board. See "Getting Help" on
page 113.
Table 1-4. System Messages (continued)
Message Causes Corrective Actions
book.book Page 43 Monday, January 24, 2011 12:24 PM