Dell PowerVault NX3500 - Manual (Page 11)

About Your Solution 11
4 LCD panel Provides system ID, status information,
and system error messages.
For more information on the LCD panel,
see "LCD Panel Features" on page 12.
NOTE: If the system is connected to
AC power and an error has been detected,
the LCD lights amber regardless of
whether the system has been powered on.
5 system identification
button
Turns the system ID modes on and off.
The identification buttons on the front
and back panels can be used to locate a
particular system within a rack.
When one of these buttons is pushed,
the LCD panel on the front and the
system status indicator on the chassis
back panel light blue until one of the
buttons is pushed again.
6 System status
indicator
Lights blue during normal system
operation. Lights amber when the system
needs attention due to a problem.
7 USB connectors (2) Connect USB devices to the system. The
ports are USB 2.0-compliant.
8 Hard drives (2) Two 3.5-inch hot-swappable SATA drives.
9 System identification
panel
A slide-out panel for system information
including the Express Service tag,
embedded NIC MAC address, and
iDRAC6 Enterprise card MAC address.
10 Optical drive One slim-line SATA DVD-ROM drive or
DVD+/-RW drive.
NOTE: DVD devices are data only.
Item Indicator, Button, or
Connector Icon Description
book.book Page 11 Monday, January 24, 2011 12:24 PM