HP 48g Graphing Calculator - Manual (Page 373)

PORT: Ñire
□EJECT:
_DEL-SPfiCE KLfiT: Newi ¿LINEF
EftUp:9600 PARITY:None LEN:80
ENTER DEJECT(g) TO PRINT
PRINT;
The Wire PRINT Screen
3. If necessary, press (A) to change the communications port to
W1 re.
4 .
Press
C H O u S ,
move the highlight to a variable you wish to print
and press OK
5. Optional: Adjust any of the printing parameters that you wish.
D E L . " " S F ' H ü E .
-HT
N E F
L E N S
6 .
Press
F ' F ; I H
Put a check-mark to produce double-spaced
output.
Choose which of four different character
translation options you wish to use. See page
27-15 for more details about these options.
Normally (check-mark on), each print
command completes data transmission by
automatically executing the CR {carnage right)
command, which tells the printer to do a
carriage-return/line-feed. Then the printer prints
the data currently in its buffer. Alternatively
(check-mark off), you can suppress the automatic
CR command and accumulate several print
commands in the print buffer, which are then
printed only when you manually execute CR
OQZ3 PR'ti'-iT CF; ).
Enter or choose the transfer speed. The printer
and HP 48 must have the same setting.
Enter or choose the parity setting for the transfer.
The printer and HP 48 must have the same
setting.
Enter the printer’s line length (in characters).
27
Transmitting and Printing Data 27-5