HP 48g Graphing Calculator User Manual
Page 401
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
6. Remove the port cover at the top of the calculator by pressing
down against the grip area and then pushing in the direction
shown. Removing the cover exposes the two plug-in ports.
7. Select the empty slot for the card.
8. Position the plug-in card as shown. The triangular arrow on the
card must point down, toward the calculator. Make sure the card
is lined up properly with a slot opening and not positioned half in
one slot and half in the other.
28
Libraries, Ports and Plug-In Cards 28-13
Advertising
This manual is related to the following products: