Document Outline

• Thank you for purchasing a Canon product.
• About Macro Twin Lite MT-24EX Instructions
• How to Use this B
• Contents
  • Control Unit
  • LCD Panel
• Before You Start
  • Installing Batteries
    • Insert the batteries.
    • Close the battery chamber cover as shown in the diagram.
    • Recycling Time and Flash Count
  • External Power Sources
  • Attaching the Control Unit to the Camera
• 1
  • Loosen the locking collar by turning it as shown by the arrow.
  • Turn the iocking collar as shown by the arrow and tighten.
  • Attaching the Flash Ring
    • Press the release buttons on both sides of the flash ring.
    • Attaching the Macro Lite Adapter 72C
  • Main Switch
    • Turns off the power.
    • Turns on the power.
    • Turns on the power and enables the SE mode.
    • Memory feature
  • Pilot Lamp and Test Firing
    • Check the Pilot lamp.
    • Press the Pilot lamp (test firing button).
  • Flash Exposure Confirmation
  • Flash Range
  • Flash Mode
    • Press the <MODE> button.
  • Setting the Film Speed
  • LCD Panel Illumination
    • Press the <-^-> button to illuminate the LCD panel.
  • Focusing Lamp
    • Press the < LAMP >button.
    • Focus the subject.
  • Resetting to the Defauit Settings
    • Press the camera’s <CLEAR> button.
  • For Type-A Cameras Basic Flash Photography * •
    • Using Flash with the Camera’s Shooting Modes
      • Set the camera’s shooting mode to P.
      • Set the MR-14EX’s flash mode to ETTL.
      • Focus and take the picture
      • Set the camera’s shooting mode to Av and set the aperture.
      • Set the MR-14EX’s flash mode to ETTL.
      • Focus and take the picture.
      • Focus and take the picture.
  • ForType-A Cameras Advanced Flash Photography * •
    • if) deselecting the Flash Tube
      • Press the <RATIO> button and select a : b .
      • Press the < O > or < O > button to move the bar h left or right to set the respective A:B flash ratio.
      • Focus and take the picture.
      • Press the < O > or < l> > button to move the bar h all the way to the left or right to the -:iD or di:- icon,
    • Modeling Flash
      • Modeling Flash with Fiash Ratio (w/EOS-1D, 1V, 3, D30, ELAN 7/7E, or 30/33)
      • Press the depth-of-field preview button.
    • FE Lock
      • Select a shooting mode with the camera.
      • Focus the subject.
      • Focus the subject.
      • Take the picture
      • With FE lock
    • ^ Flash Exposure Compensation
      • Press the <sel/set> button and select
      • Press the < + > or <—> button to set the desired flash exposure compensajtion amount.
      • Press the <SEiysET> button.
      • Focus the subject.
      • Take the picture
    • %FEB (Flash Exposure Bracketing)
      • Press the <SELysET> button and select
• 4
  • Press the <sel/set> button.
  • Focus the subject
  • Take the picture.
  • Repeat steps 4 to 5 to take the remaining two bracketed shots.
  • 0
  • 09 High-Speed Sync (FP Flash)
    • Press the < + > and <—> buttons simultaneously to select 09.
    • Focus and take the picture.
  • M Manual Flash Mode
    • Set the camera’s shooting mode to Av or M.
    • Press the MR-14EX’s <MODE> button and select M.
• 6
  • Press the <SELysET> button.
  • Press the < + > or <—> button to set the desired flash output.
  • Press the <sel7SET> button again.
  • Set the camera’s aperture.
  • Press the <RATIO> button and select A: B.
  • Second-Curtain Synchronization
    • Set the shooting mode with the camera.
    • Focus and take the picture.
  • ForType-A Cameras Wireless Flash Photography * •
    • Setting Up a Wireless Flash System
      • Press the <CH.> button to select the channel.
      • Set the same channel No. as the master unit.
      • Set the slave ID to C.
      • Press the master unit’s pilot lamp (test firing button) to fire a test flash.
    • Using the Wireless Flash System
      • Using Slave C (w/EOS-1 D, 1V, 3, D30, ELAN 7/7E, or 30/33)
      • Check that ¡nsan a : b c ¡s displayed on the LCD panel.
      • Focus and take the picture.
      • Check that the master unit’s flash I exposure confirmation lamp lights.
  • For Type-B Cameras Basic Flash Photography * •
    • Using Flash with the Camera’s Shooting Modes
      • Set the camera’s shooting mode to p.
      • Set the MR-14EX’s flash mode to TTL.
      • Focus and take the picture.
      • Set the camera’s shooting mode to Av and set the aperture.
      • Set the MR-14EX’s flash mode to
      • Focus and take the picture.
      • Focus and take the picture.
  • ForType-B Cameras Advanced Flash Photography * •
    • -'ID deselecting the Flash Tube
      • Press the <ratio>button.
      • Press the < <3 > or < O > button to select the flash tube(s).
      • Focus and take the picture.
      • 00Flash Exposure Compensation
        • Press the <sel/set> button and select
        • Press the < + > or <—> button to set the desired flash exposure compensation amount.
        • Press the <SELysET> button.
        • Focus the subject.
        • Take the picture.
    • %FEB (Flash Exposure Bracketing)
      • Press the <sel/set> button and select
      • Press the <sei7SET> button.
      • Focus the subject.
      • Take the picture.
      • Repeat steps 4 to 5 to take the
      • remaining two bracketed shots.
    • M Manual Flash Mode
      • Set the camera’s shooting mode to Av or M.
      • Press the MR-14EX’s <MODE> button and select M.
      • Press the <sel/set> button.
      • Press the < -i- > or <—> button to i set the desired flash output.
      • Press the <sel/set> button again.
      • Set the camera’s aperture.
      • Focus and take the picture.
      • Press the <ratio> button and select A : B .
    • Second-Curtain Synchronization
      • Set the shooting mode with the camera.
      • Focus and take the picture.
    • Wireless Manual Flash
    • QiCustom Functions
      • Press the <C.Fn> button for at
      • least 2 sec.
      • Press the <SELysET> button.
      • Press the <sel/set> button.
      • Press the <C.Fn> button or the <M0DE> button
      • Custom Function Settings
    • MR-14EX/MT-24EX System
      • © Macro Ring Lite MR-14EX @ Macro Twin Lite MT-24EX @ Connecting Cord ET (included with Transistor Pack E)
      • @ Transistor Pack E
      • ® Battery Magazine TP
      • © Ni-Cd Pack TP
      • @ Ni-Cd Charger TP
      • ® Compact Battery Pack CP-E2
      • © Speediite 550EX (Slave unit)
      • (© Speediite 420EX (Slave unit)
      • ® Off-Camera Shoe Cord 2
    • Troubleshooting Guide
    • Specifications
      • Guide No. [Normal Flash]
      • Camera’s Flash-Related Exposure Warnings
    • Feature Availability Table
  • Macro Twin Lite MT-24EX Features
    • Nomenclature
    • Attaching the Flash Heads
      • Press and hold down the release button on the top of the mount ring.
      • Attach the mount ring to the front of the lens.
      • Attach the flash heads to the flash head mounts.
      • Attaching the MP-E 65mm f/2.8 1-5x’s Dedicated Hood
      • Attaching the EF 100mm f/2.8 MACRO USM’s Dedicated Hood ET-67
      • Attaching a Filter
    • Flash Head Movements
      • Flash Head Tilt and Swing Movements
      • Rotate the flash head mount.
      • Rotating the Mount Ring
      • Setting the Flash Head Angle
    • Flash Distance Range
    • QSCustom Functions
      • Custom Function Settings
    • Major Specifications
  • Canon
    • "тяп?таядж1