Canon 814XL-S User Manual
Page 141
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* When playing back a quiet soundtrack, some
tape recorders may play back the pulse noise
as well.
Editing and Splicing
For post-recording and film editing, follow the in
structions of the individual pieces of equipment
used. Tape should be used ifor splicing. The use
of cement would require cutting every frame that
is not spliced properly and would prevent proper
synchronization of the recording to the film.
When splicing, cut the film at right angles to the
direction of transport.
The 8-Pin Jack
The internal connections of this jack are as
illustrated on this page. Connections 1-4 are used
for the sync-controller. When making separate
connections, be careful not to connect 3 to 4
which might cause a short circuit or other in
ternal circuit problems.