Canon 814XL-S User Manual

Page 53

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1. Check the footage counter as well as the

footage indication needle to the left of the pic­

ture field.

2. If the footage counter indicates that the car­

tridge is finished, replace the cartridge.

3. If the footage counter indicates that unex­

posed film remains, check the batteries. If

they are weak, change them.

4. If the footage counter shows remaining foot­

age and battery power is sufficient, remove
the film magazine, being careful not to tear

the film in case it is stuck. Be especially care­
ful in the case of film jam at the bottom of a

sound cartridge. Once the cartridge is re­

moved, wind the spool manually to take up

the slack by turning the core two or three
times clockwise. Tap the cartridge lightly on a

flat surface and then reload it into the camera.

Normal function usually resumes.

Advertising