Grip, Lens cap, Loading the batteries – Canon 814XL-S User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Grip

The camera's foldable grip doubles as a battery

compartment.

Stored

in

the

upward

position,

it should be lowered for shooting. To lower it,

swing

it

downward,

while

pushing

the

grip

release in the direction of the arrow, until it stops

and locks into position. You should slide your

right fingers under the grip band while shooting.

Adjust the grip band to the most comfortable

length for you. To fold the grip back up, push the

grip release again.

Lens Cap

The lens is provided with a front cap which can

be attached and removed by pressing in the tabs

on both sides of the cap. To protect the lens, this

cap should always be attached when not filming.

Loading the Batteries

This camera will not function without batteries.

Since

it

is

controlled

electronically,

batteries

power

all

systems,

including

film

drive,

the

recording mechanism and exposure control. Use

six

AA-size

1.5V

(penlight)

alkaline

manganese,

carbon

zinc

or

Ni-Cd

batteries.

Wipe

battery

poles with a clean, dry cloth before insertion to

avoid possible corrosion to contacts due to dirt

or fingerprints.

Advertising