Shutter release lever, r/rl switch – Canon 814XL-S User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Shutter Release Lever, R/RL Switch
The shutter release lever is a two-step control.
Pressing it halfway gives a meter reading in the
viewfinder
and
enables
sound
monitoring.
Pressing it all the way starts filming and, in the
case of sound film, recording. If the R/RL switch
is in the R (Running) position, filming and record
ing will continue as long as the shutter release
lever is pressed and stop when you let go of the
release lever. If it is set to “RL" (Running Lock)
filming and recording will start when the shutter
release lever is pressed all the way and continue
even when your finger is removed from the
release lever. Filming will stop when the release
lever
is
pressed
again.
Do
not
switch
the
position
of
the
R / R L
switch
while
pressing
the shutter release lever.