Canon 814XL-S User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rim Transport and Him End Warnings
An END warning will appear superimposed over
the lower right corner of the picture field in the
viewfinder of the 1014XL-S and a red LED
warning to the right of the picture field in the
viewfinder of the 814XL-S to indicate battery
exhaustion. These same indications also warn of
faulty film transport and film end. They give
these warnings as follows.
The END warning (1014XL-S) or red LED
(814XL-S) will blink on and off twice per second
in the following situation:
1. Two feet before the end of the cartridge.
This warning will not occur if the cartridge
was reloaded after having already been par
tially exposed.
The END warning (1014XL-S) or red LED
(814XL-S) will come on and glow steadily and
camera operation will stop automatically in the
following situations:
1. When the cartridge is finished.
2. If the film jams in the cartridge.
3. When battery power becomes too low.
Since the warning will glow steadily in several
situations, pinpoint the reason by taking the
following steps in this order: