Power zooming – Canon 814XL-S User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power Zooming
Power zooming is possible only when the main
switch is "ON". Set the zooming speed switch to
either the "L" (low) or "H" (high) click-stop po
sitions and press either the "W" (wide-angle) or
"T"
(telephoto)
zooming
button.
Pressing
"T"
will
cause
the
lens
to
zoom
automatically
towards
the
maximum
focal
length
for
greater
magnifications. Pressing "W" will cause the lens
to
zoom
automatically
towards
the
minimum
focal
length
for
lower
magnifications.
To
stop
power
zooming,
release
your
finger
from
the
zooming button. At "L" the speed is approxi
mately nine seconds, at "H" approximately five
seconds, for the full 8X or 10X zoom. Do not
set
the
zooming
speed
switch
between
click-stop positions.