AVer CM5000 - Manual (Page 100)

93
6.2.2 Network Setting
Select type of IP mode, setup the IP address of NVR/DVR, and configure the DDNS.
1. In Network dialog box, click Networking 1 tab.
2. MAC Address: Displays the MAC address of Ethernet port on LAN card.
3. Select the IP mode – Static IP, DHCP, PPPOE.
 Static IP: Assign a fixed IP address for NVR server
- IP ADDRESS: Assign a constant IP address which a real IP addresses given from
ISP.
Do Not assign the NVR server to 1.0.0.0 network segment. It will be caused the
NVR cannot access to Internet due to the un-recognize to 1.0.0.0 IP segment.
- Mask: It is a bitmask used to identify the sub network and how many bits provide
room for host addresses. Enter the subnet mask of the IP address which user has
assigned to NVR system.
- Gateway: A network device act as a passageway to internet. Enter the network
gateway IP address
- DNS: Domain Name Server translates domain names (such as www.abb.com.tw)
to IP addresses. Enter the IP address of DNS if it is available.
 DHCP: Uses DHCP server assigning NVR server an IP address.