AVer CM5000 - Manual (Page 145)

138
5. In Alarm Reset section, click the camera number to set the reset condition of alarm. Once
alarm is reset, all alarm action will stop at the moment. If the sensor normal status is high,
set the alarm reset condition to low.
- IP Camera Sensor: To adjust sensor high/low that is connected on the IP camera.
- Alarm Reset Time: Set a time for the alarm auto reset. When an alarm happen such
as motion detected and video loss, the alarm will reset at the alarm reset time.
6. In Action section, user may now set the alarm action for the system to perform when the
alarm condition is activated.
- Launch E-Map: Display mini E-map on the screen.