Setup alarm schedule – AVer CM5000 User Manual
Page 150
Advertising
![background image](/manuals/634455/150/background.png)
143
Setup Alarm Schedule
Setup the schedule for alarm action that user has setup in Alarm setting (see also
). According to the alarm schedule, the alarm actions will be active and alarm will be
issued when action has matched the conditions.
1. In setup mode, select the NVR/DVR server. Then, click the Alarm setting and select
Alarm schedule tab.
2. Select the Enable and click on the date and time to setup the schedule.
3. Next, click Apply to save the setting.
4. To disable the alarm schedule, select
“Disable” and click on the date and time table and
click Apply to save the changes.
To select or un-select all
blocks, click the area in
upper-left corner.
Advertising