AVer CM5000 - Manual (Page 101)

94
 PPPoE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating
PPP frames in Ethernet frames. It is used mainly with ADSL services. If your network is
using ADSL service connecting to internet, and then, select PPPOE mode. Enter User
ID and Password that is given by your ISP for PPPOE connecting authority.
4. Set as default gateway: The NVR system supports dual LANs, but only one LAN port can
be set as default gateway.
5. Setup the DDNS. To use this feature, go to http://dyndns.org register. Only the LAN port
is set as default gateway can be set DDNS function.
 Domain Name: The user has applied on DDNS website.
 ID: The account ID that user has created on DDNS website.
 Password: The password that user has setup on DDNS website.
 Server Name: The domain name server that user has applied the domain name.
 Server Port: The port is use to connect the domain name server.
6. After enter all necessary information, click Apply button to save the settings.
7. To setup the Network 2, click Network 2 tab and follow above steps.