AVer CM5000 User Manual
Page 135
Advertising
128
6. DwellTime: For how long the camera stays in that position before it moves to the next one
(the setup time period is 1~60 seconds). After is done, click Save to keep the settings.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ
camera has been moved. Mark the check box and set the time period in second.
8. Click Apply to save the settings.
9. After completing the PTZ setting, user can operate the PTZ function through PTZ control
panel in preview mode (see also
Advertising