AVer CM5000 - Manual (Page 148)

141
 Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification,
enable Authentication check box and enter ID and Password.
 Mail
Fill the mailing information. Click Test Account button can exam the mail is
workable or not.
 From: Enter the sender e-mail address.
 To and CC: Enter the recipient email address and separate it with comma or a
semicolon (;).
 Subject: Enter the message title.
 Message: Type the message.
 Notice Interval: Set a time gap for mail re-sending when mail has failed to
send.
 Snapshot
When send out the email, the NVR system will snapshot image of the selected
camera channel.
 Select Camera: Select the channel that will be snapshot when alarm email is
sending out.
 Video Size: Select the size of vide that will be taken when snapshot. Auto
means default size that chosen by NVR system.
- File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol).
 FTP Setting
 IP: Enter FTP server’s IP address
 Port: Enter the port number of FTP
connection.
 ID& Password: Enter the ID and
Password that use to login FTP
server.
 Upload Video Clip
 Select Camera: Select the camera
that the images will be captured
and send when the any alarm is
triggered.
 Before alarm (sec.)/After Alarm:
To send the recorded image before
and after alarm occurs, enter the
time that before alarm occurs in Before alarm(sec.) and After alarm.