Cross detection – AVer CM5000 User Manual
Page 125
118
Cross Detection
Cross detection function detects moving objects that cross the virtual lines that user has set up
in IP camera application and to trigger the alarm.
1.
Enable Cross line 1/2 check box
2.
You will see the red/green line is shown on the video screen.
3.
Drag the red line or green line to set the area for cross detection. You can set both lines
for cross detection or one of the lines. There is no
priority for these 2 lines; the color is just for you to
differentiate when both lines are set.
4.
After setting the cross detection area, click the arrow
of line to set cross detect direction. The arrow point
is the direction of cross way.
5.
In Display on OSD, if user wants to see the cross
detection line(s) always display on the screen, select always. If user only wants to see the
cross detection line(s) when the cross detection has triggered, select the time period (1s,