AVer CM5000 - Manual (Page 104)

97
Setup the Transmitting Camera
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using Remote site control and iPhone/Andorid Viewer. To select all the
cameras, enable the ALL check box.
Setup the UPnP
Assign a port number of NVR for UPnP service. Click OK to save the setting.
This function is working when the router had enabled the UPNP function and had opened the
port, which had assigned for UPNP setting, for the DVR system.
Setup the Bandwidth Limit
Set the network bandwidth consumption limit for remote accessing. Click OK to save the
setting.