Setup camera ptz function, Setup ip ptz – AVer CM5000 User Manual
Page 132
Advertising
125
Name
Function
Reset
To reset the zoom back to the center of screen view in
default value (1x).
Setup Camera PTZ function
Setup IP PTZ
User can enable PTZ function if the IP camera has supported.
1. In setup mode, select the NVR/DVR server. Then, click of Camera setting to expand the
camera list.
2. Then, select Camera # > PTZ tab. In PTZ page, click Use PTZ to enable PTZ function.
3. Mark User PTZ check box to enable PTZ function.
4. Preset Setting: use the control panel to adjust the position of the camera and select the
Preset Number to assign a number for the camera current position. After is done, click
Save to keep the settings.
Advertising