AVer CM5000 - Manual (Page 139)

132
6.2.6 Alarm Setting
To setup an alarm setting, user needs to complete following steps:
1. Setting up the alarm conditions
2. Setting up the alarm actions
3. Setting up the alarm schedule(see also Chapter 5.2.5 )
In the following chapter, it describes how to setup the alarm condition and action.
Setup the Alarm Condition
1. In setup mode, select the NVR/DVR server. Then, select Alarm Setting.
2. User should see the Alarm Setting dialog box is displayed.
3. Next, click Add to create a new alarm condition setting.