9 setup the ipos, Setup the ipos – AVer CM5000 User Manual
Page 156
Advertising
149
6.2.9
Setup the iPOS
Set from which camera screen to display the data from the POS equipment. Click Setting, to
set the POS Console Setting.
1. Click Setup tab. Click + to expand the System Setting list and select Hardware Device.
2. User should see the Hardware Device Setting dialog box is displayed.
3. In the Hardware Device Setting dialog box, click Add to set a new POS setting.
4. In the POS Mapping dialog box, fill and select the following settings. Click OK to save the
settings and Cancel to exit without saving the new setting.
Advertising