Sensor – AVer CM5000 User Manual
Page 129
Advertising
122
Sensor
Setup the sensor of IP camera.
1. In Camera Management dialog box, click Sensor tab.
2. Click the drop-down list and select the sensor ID number.
3. Enter sensor name in Name column
4. In the Content section, display the NVR system automatically detects the camera and input
relates information. Enter a short comment for this sensor in Description column.
5. In the test section, click Test to check the sensor status. Red is high and Green is low.
6. Click Apply to exit and accept the setting and Cancel to exit without saving the setting.
Advertising