AVer CM5000 - Manual (Page 110)

103
Connect an IP Camera
1. In setup mode, select the NVR/DVR server and click the Camera Setting.
2. In Camera Information page is divided into 4 areas –, Camera List, Search List, and
Capacity, and Camera Information
- Camera List: List all camera channels. When the channel has connected IP camera, it
displays the IP Address, Protocol, Model, connection Status, FPS, Bitrate, and configure
detail button of the connected IP camera.
- Search List: To perform the auto search IP camera on your LAN network and list search
result.
- Capacity: Display all connected IP cameras ’ resolution in Used (MP) column and the
how many resolutions are available in Available (MP) column.
- Camera Information: For entering the IP camera ’s parameters when connects the IP
camera.