Dynojet 424xLC2: Installation Guide - Manual (Page 104)

C H A P T E R 4
Eddy Current Brake Installation
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
4-8
7 Remove the five screws and nuts securing the front and rear covers. Set the
screws, nuts, and covers aside.
#
RECORD
Be sure you record the dynamometer and/or eddy current brake number
on the inside cover of this manual.
Figure 4-5: Remove the Front and Rear Covers
EB170
front and rear covers
screw
nut
brake number