Dynojet 424xLC2: Installation Guide User Manual
Page 46
Advertising
C H A P T E R 3
Unpacking and Inspecting the Dyno
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
3-4
5
Remove the crate braces that support the top portion of the crate.
6
Remove the four lag bolts and washers securing the dyno to the crate base using a
9/16-inch socket, open or box end wrench.
7
Before removing the dyno from the crate, you will need to install the track
assembly in your dyno room. Refer to the instructions page 3-5 for more
information on installing the track assembly.
Advertising
This manual is related to the following products: