Dynojet 424xLC2: Installation Guide - Manual (Page 159)

C-5
S T A T I O N A R Y D Y N O U P G R A D E
Deck Relocation
Version 1 Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
9 Remove the two 3/8-16 x 1-inch bolts and two washers securing each mounting
bracket and set aside.
10 Remove the mounting bracket and set aside.
Note: If you have an eddy current brake, there will be only one mounting bracket.
11 Continue with installing the lift kit on page C-16.
Figure C-4: Remove the Mounting Brackets
AD105
mounting bracket
mounting bracket