Dynojet 424xLC2: Installation Guide - Manual (Page 92)

C H A P T E R 3
Deck Installation
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
3-50
13 Install the tube to the outer panels and deck supports using four 
3/8-16 x 3-inch flange hex bolts, four 3/8-inch flat washers, and four 3/8-inch
nylock nuts.
14 Install a plastic plug in each end of the tube.
Figure 3-35: Install the Tube
A 623 D
tube
plug