Dynojet 424xLC2: Installation Guide - Manual (Page 19)

1-9
S P E C I F I C A T I O N S A N D O P E R A T I N G R E Q U I R E M E N T S
Dynamometer Specifications and Requirements
Version 1 Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
E LECTRICAL R EQUIREMENTS
The hydraulic pump/motor power source and eddy current braking power source
require user supplied grounded electrical outlets with over current and short circuit
protection. These must be accessible to the operator to be used as a disconnect.
E NVIRONMENTAL R EQUIREMENTS
description specifications
Power Requirements: 4WD electronics 100-240 VAC, 50/60 Hz
Power Requirements: dyno electronics 100-240 VAC, 50/60 Hz
Power Requirements: hydraulic motor 110 VAC, 60 Hz, 20A/240 VAC, 60 Hz, 10A
Power Requirements: computer Per computer manufacturer specifications
Power Requirements: optional eddy
current brake
240v 30amp single phase circuit for each eddy current
brake
Refer to Appendix B for more information.
description specifications
Temperature
operating min./max 10°C/50°C (50°F/122°F)
storage min./max 0°C/70°C (32°F/158°F)
Humidity 0 to 95% non condensing